Voorzijde LED lamp
Check het LED lampje. Staat het apparaat aan dan is het lampje blauw. Laadt hij op dan is het lampje rood. Brandt het lampje niet, dan dient u het apparaat op te laden met de bijgeleverde USB-kabel, reken op circa 2 uur voor een volledige lading.
B
Vier elektrode sensoren
Met behulp van de vier elektrode sensoren worden Spiermassa, Lichaamsvetmassa, Lichaamsvetpercentage en Basaal Metabolisme Ratio gemeten.
C
Versnellingssensor
Activiteiten kunnen worden gemeten door een versnellingssensor
D
Aan/uit knop
Druk zacht op het kleine witte knopje onderaan het apparaat, indien u een blauw lampje ziet branden dan staat het apparaat aan. Gaat het lampje niet branden, laad dan het apparaat op voor gebruik met behulp van de bijgeleverde USB kabel. U kunt een computer of een 5-pins (telefoon)oplader daarvoor gebruiken.
Insert your basic information such as gender, height, weight and birth year.
3
Turn on the device and select the Measure button in the App. Lightly pinch 4 electrodes with both of your thumbs and index finger. Stretch your arms and avoid your hand to touch each other, also do not talk while you are measuring.
4
From the ONE SMARTDIET App you may check the measurment result and analysis from many different menus.
5
ONE SMARTDIET App is constantly updated and maintained.
Body composition is more important than Weight.
Body composition management is now a health care essential.
You don't need to go to the hospital or fitness center for body composition analysis. ONE SMARTDIET makes it simple and easy to measure, analyze and monitor your body composition.
It works with apps via Bluetooth and provides all data and analysis information.
ONE SMARTDIET App is compatible with Android version 4.4, iOS version 9.0, and above. ※ Some devices may not be supported.
De ONE SMARTDIET wordt ondersteund door BLE(Bluetooth low energy), dit betekent dat u geen PIN CODE op uw smartphone hoeft te gebruiken om een verbinding te maken tussen de OSD en de smartphone met de applicatie.
Space on Phone : 65MB and Above
If you download the app as an Apk file, you should update the app manually.
Het wordt aanbevolen om (altijd) de nieuwste versie van de ONE SMARTDIET applicatie te gebruiken voor het correct functioneren en de beste meetresultaten. Controleer regelmatig de Google Play Store of iTunes.
Warning
ONE SMARTDIET is not a medical device and should not be used for diagnostics or treatment.
Do not use this device if you are dependent on any biometric devices, such as a cardiac regulator, medical ECG, mechanical heart, or heart-lung machine.
ONE SMARTDIET is using a BIA(Bioelectrical Impedance Analysis).
Therefore, the measurement value may change may depend on the environment and season.
ONE SMARTDIET uses sensitive sensors for measurements.
It may cause malfunction due to the heating element such as the stove or the low-temperature environment.
Do not use ONE SMARTDIET to measure your body composition during pregnancy or menstruation.
There will be discrepancies.
The electric current (under 150 uA of 50 kHz) is too low for anyone to sense or be affected by it.
If you do experience any sensations or symptoms, immediately cease its operation.
Do not disassemble or modify the device.
Avert any physical trauma to the device.
Requirements for the Safety
Make sure to remove any nearby devices that can cause wireless interference. These sources include but are not limited to microwave ovens, wireless audio operating in the 2.4 GHz or 5 GHz bandwidth, and certain power sources. These sources can cause slower performance or disconnection from ONE SMARTDIET and may also interfere with the Bioelectrical Impedance Analysis, resulting in inaccurate readings.
Do not eat or dismantle the battery. Keep out of children’s reach.
You must follow local regulations when disposing of the device or any of its components and accessories.
Warranty
Als het apparaat of de applicatie niet werkt, stelt u ons daarvan aub op de hoogte. (Republic of Korea) Contact :+82-54-282-4467
Within the one-year warranty period, if any malfunction transpires under normal use, as established by the manual, the affected components of the product will be exchanged free of charge.
Past the one-year mark of the initial purchase, you will be responsible for the cost of any exchanges.
In principle, the components will be exchanged with those of the same color and model.
The customer is always responsible for the shipping costs.
In the following cases, the service fee may be charged even during the warranty period. Malfunctions or damages of any disassembled or modified devices. Damages caused by water / liquid or any weather conditions.
